Ultra w/ Remote Control

 

Our Ultra Models come standard with a variable speed remote drive (pre-wired with approximately 60' of heavy duty wire).  This allows you to mount the remote drive outside of your walker area, either on a pole or on your barn wall.  All you need is a 110v outlet to plug into.  DO NOT use a GFI outlet. The remote drive allows you to control your Ultra walker without having to go to the walker base every time you want to start, stop, change directions or speeds.  Note:  The remote drive is weather proof, but not water proof.  Therefore, we recommend you put some type of cover over or around the drive.

Optional:  Remote Drive with Adjustable Preset Reversing Timer.  This option allows you to preset your drive so that your Supreme Freeflow walker will reverse on it's own. This option comes at an extra cost of $400.

These walkers require very little maintenance that will cost you less than $5 per year.  They offer an easily accessible grease fitting and oil fill inlet.  All parts are lubricated from the factory, therefore, these walkers are ready for use as soon as they are assembled.  The heavy duty frames and arms are made of square tubing, which is stronger than angle or round pipe.

The frames and arms are made of square tubing, which is stronger than angle or round pipe.  The hanging gates are made from a heavy gauge, lightweight, galvanized metal. 

A concrete pad of 5' x 5' square by 1' thick is recommended to anchor the walker.

The standard color is Red with Buckskin arms and pin stripes.  Be sure to check out our 'Available Colors' page to see other colors we have painted.

 

(The Ultra looks the same as the Standard Model.  Featured in this picture is the Standard 4-Horse Heavy Duty.)

 

4-Horse Ultra Features:
 

  • 1" square tubing heavy duty frame

  • 2" square tubing arms (14' long / 28' span)

  • 1 HP motor

  • 3 belt drive for excellent pulling power

  • Variable speeds with forward and reverse

  • Pre-wired Remote Control box with approximately 60' of wire

  • Safety Quick-Release Connections on each arm

  • Galvanized sheet metal exterior

  • Automotive paint

  • Assembly time 15-20 minutes

This 4-Horse Ultra Supreme Walker is reasonably priced at $4,595.00

 

6-Horse Ultra Features:

  • 1" square tubing heavy duty frame

  • 2" square tubing arms (17' long / 34' span)

  • 1 HP motor

  • 5 belt drive

  • Variable speeds with forward and reverse

  • Pre-wired Remote Control box with approximately 60' of wire

  • Safety Quick-Release Connections on each arm

  • Galvanized sheet metal exterior

  • Automotive paint

  • Assembly time 20-30 minutes

This 6-Horse Ultra Supreme Walker is reasonably priced at $5,295.00

 


CALL BYRON SMITH FOR MONTHLY SPECIALS!
256-412-5782 or 800- 682-1748


SAFETY QUICK-RELEASE

Each arm has a cable that is attached to a spring loaded rod inside the end of the arm.  If a horse falls or gets a leg over the lead, you can release it from a safe distance.  To do this, simply jerk the cable and the lead will be released from the arm, therefore letting the horse loose from the walker.  This protects the horse and yourself from possible injury.


Guarantee

Any defective part will be repaired or replaced, upon return to our factory.  We offer a lifetime warranty on the frame and a 12 month warranty on all parts and labor, from the date of purchase. Not responsible for any problems associated with misuse, abuse or modifications.


For more information or a personal consultation about any of our products, which are proudly made in the U.S.A.,
E-Mail Us or Call Us at 256-412-5782 or Toll-Free at 800-682-1748.


 2008 Supreme Horse Walker Enterprises, LLC
8061 County Rd 61
Florence AL 35634

Email Us