Free Flow Walker with Variable Speed Remote Drive

Featured here is a custom ordered 6-Horse 48ft span Supreme Free Flow Walker

(This picture courtesy of Ricky Ray, AL, 2013)

In an attempt to continue to improve our products, our Freeflow Walkers were re-designed in 2018 and tested for approximately one year before being offered to our customers in the summer of 2019.  We feel really good about where we continue to go with this unit. 

The Freeflow Walker comes standard with variable speed remote drive (pre-wired with appx. 60ft of heavy duty wire).  This allows you to mount the remote drive outside of your walker area, either on a pole or on your barn wall.  All you need is a regular 110v outlet to plug into.  DO NOT use a GFI outlet.  The remote drive allows you to control your Freeflow walker without having to go to the walker base every time you want to start, stop, change directions or speeds.  Note:  The remote drive is weather proof, but not water proof.  Therefore, we recommend you put some type of cover over or around the drive. 

Optional:  Remote Drive with Adjustable Preset Reversing Timer.  This option allows you to preset your drive so that your Supreme Freeflow walker will reverse on it's own. This option comes at an extra cost of $400.

The Freeflow walker also comes standard with hanging dividers (which keeps each horse in its own section and allows them to remain free instead of being tied to an arm). 

We offer 50' and 60' arm spans, but can also work with your specific needs, if you are limited on space.  Note: The Freeflow arms are not designed to have horses tied to them or for anything heavier than the hanging dividers that we provide.  We do not electrify the hanging dividers of our Freeflow walkers.  However, they are designed so they can be electrified easily, if you wish to do so.

Maintenance on our Walkers is very simple and should cost you less than $5 per year, unlike hydraulic walkers, which consists of:  hydraulic motors, pumps, filters, hoses and fluid, which can be very costly to maintain, replace or repair.  Our Walkers offer an easily accessible grease fitting and oil fill inlet.  All parts are lubricated from the factory, therefore, these walkers are ready for use as soon as they are assembled. 

The frames and arms are made of square tubing, which is stronger than angle or round pipe.  The hanging dividers are made from a heavy gauge, lightweight metal. 

We recommend a concrete pad of 5ft x 5ft square x minimum of 1ft thick to anchor the walker.

The standard color of the base is Brown Red with Buckskin pin stripes.  The standard color of the arms is Buckskin.  The hanging dividers are painted black.  Be sure to check out our 'Available Colors' page to see other colors we have painted.

 Featured here is our 4-Horse 50ft span Free Flow Walker

(Picture courtesy of Richard and Beth Booker, Hurricane Acres (Miniatures), Canton, MS, March 2013)

4-Horse Free Flow Features:

  • 1-1/2" square tubing heavy duty frame

  • 2" square tubing arms

  • Hanging Dividers

  • 2 HP motor

  • 2 belt drive

  • Variable speed remote control with forward and reverse

  • Galvanized sheet metal exterior

  • Assembly time 2-3 hours

This walker is very reasonably priced as follows:

        50' Span                $8,495.00

       60' Span                $8,995.00

(Prices DO NOT include surrounding corral panels / fencing) 

6-Horse Free Flow Features:

  • 1-1/2" square tubing heavy duty frame

  • 2" square tubing arms

  • Hanging Dividers

  • 2 HP motor

  • 2 belt drive

  • Variable speed remote control with forward and reverse

  • Galvanized sheet metal exterior

  • Assembly time 3-4 hours

This Walker is very reasonably priced as follows:

       50' Span                $9,495.00

       60' Span                $9,995.00

(Prices DO NOT include surrounding corral panels / fencing) 

Featured here is our 4-Horse 48ft span Free Flow Walker

(This is our personal walker, here at Supreme)



Guarantee

Any defective part will be repaired or replaced, upon return to our factory.  We offer a lifetime warranty on the frame and a 12 month warranty on all parts and labor, from the date of purchase. Not responsible for any problems associated with misuse, abuse or modifications.


For more information or a personal consultation about any of our products, which are proudly made in the U.S.A.,
E-Mail Us or Call Byron Smith at 256-412-5782.


© 2008 Supreme Horse Walker Enterprises, LLC
8061 County Rd 61
Florence AL 35634

Email Us